Instagram View on Instagram
RegisterForgot your password?Log in with Facebook
+79261200006
More items like this arrive this month. Visit us in a week or two to check what's new here!
Quick Intro

This titanium flagship torch is a resonating synergy of 371 V2 engine combined with the newest CREE's technology. Just released XP-P LEDs deliver breakthrough levels of intensity with up to 2100 lm available in boost mode produce a way tighter beam angles and much longer throw distances than any previous FL33 generation.

Program Online
Download User Guide
SERIAL NUMBER FL3300455 LEDs: 3UP CREE XP-P 5500K
Max 2100 lumen | 270m of throw
32 memory modes, 4 switchable files
T12 Custom Narrow TIR Lens with glow
4th LED: Deep Red 640nm
Fully programmable with optical NXS R1
Light and Motion Sensing UI
Anti-slip deep grey DLC coating
Battery Level Indicator, ceramic button
IP68/IP69K up to 100 meters
FL33 XPP Ti
Diamond-like Carbon

This titanium flashlight
unveils all new features of 371v2 and 372v2 light engines. Thanks to e-switch you can now swap memory files just in two clicks, access the turbo mode with a double-click, install a defense strobe as a instant access mode just in one tap from standby and more.

Program now
Download User Guide
SERIAL NUMBER FL3300203 (see details) LEDs: 6up CREE XD16 High CRI 2700K
Up to 1400 lumen
Up to 32 memory modes (8 modes in 4 files)
T12 Custom Narrow TIR with glow
Sec. LED: Amber 611nm
Fully programmable with optical NXS R1
Light and Motion Sensing UI
Anti-slip deep grey DLC coating
Battery Level Indicator, ceramic button
IP68/IP69K up to 100 meters
Review
FL33 v4 Ti
DLC

In 2020 ARTIFACT returns to public thanks to new artist joined our team and with new glazing techniques. This is a tiny 2200 lumen full ceramic sapphire crystal flashlight that features glazing art made with noble metals such as gold and platinum. Handmade and baked in a muffle furnace at 1600C°, it all makes any ARTIFACT rock solid like a stone, almost everlasting, single and absolutely unique.

Program now with NXS
SERIAL NUMBER 31331 (see details) LEDs: 3UP CREE XP-L HI 4000K
Lum. flux: 2200lm (with Keeppower IMR 18350)
4th LED (moonlight): Amber 611nm
Fully programmable with optical NXS R1
Optics: T11 Custom TIR, 18° FWHM
Motion sensing, dual timing profile
Glazed ceramic body, twisty operation
AR coated sapphire crystal lens
ARTIFACT 2020

In 2019 our legendary FL33 flashlight returns in a brand new mat grey DLC titanium body. Lightweight and strong EDC flashlight now introduces excellent grip, outmost durability and features no one else has like wireless optical programming, motion sensing, electronic button, battery meter and even more.

Program now
User Guide What's new in v3.5
SERIAL NUMBER FL3300220 (see details) LEDs: Triple Nichia 219C HI CRI
T11 Custom Narrow Lens
Lum. flux: up to 2000lm (with IMR 18350)
Color Temperature: 4000K (Neutral)
4th LED: Amber 611nm
Fully programmable with optical NXS R1
Motion Sensing UI
Matte grey DLC Titanium body
Battery Level Indicator, Ceramic Button
IP68/IP69K up to 100 meters
Review
FL33 v3.5 Ti
DLC

1. New high-efficient PWM-free switching regulator. There are at least four solid reasons why the switching driver makes its job a way better than any popular FET/H17F linear driver:

a) The switching regulation is almost lossless. It provides much longer runtime in all modes with any battery just because all battery power is directed to the LEDs, no FET resistance loss.

b) The switching regulation provides stable lumens and its output doesn't depend on the battery charge. As the battery voltage drops down, the regulator increases the amps to keep the wattage and thus the output stable.

c) The new FL33 uses a constant current regulation in all modes, with no PWM, in all range from 0.17lm to 3500lm. Flickerless and silent operation is not the only benefit of this technology. LED runs with much higher efficiency at low amps. The fewer amps are driven into LED, the higher its lumen per watt rating. The constant current fully takes advantage of this feature providing more runtime and increasing battery life.

d) The switching driver operates at a way wider voltage range. You can feed your flashlight with one or two ICR/IMR cells or with two CR123A primaries.

2. Two times more lumens with any battery. The new v3.0 draws up to 17 watt from one cell and up to 35 watt from two IMR cells. The peak output with 3up CREE XP-L is increased to 3500 lm (3.2 Amp per each LED).
3. Two moonlights. The 4th low-power color LED with its own lens is added for close range "moonlight" lighting. Three color options are available: yellow, deep red and red-orange. The red-orange is the brightest.
4. Wireless optical programming. You can fully customize your flashlight, enable advanced features, control the battery protection and stretching, select memory options and so on with any web enabled device, tablet or phone. You can even program it from your smart TV.
5. Enhanced safety. Reverse polarity protection, under-voltage and over-voltage checks, the battery amp limit (6A), programmable and adaptive temperature control, programmable output limits per each battery configuration, programmable Li-Ion battery protection with optional stretch, adjustable light bounce switch that protects your clothes from burns at close distance.
6. More functions. Instant access to any moonlight (white or red) or defense strobe. Voltage display shows the actual battery voltage, to access it press and hold the locked button. Use custom signal generator to program beacon or strobe or navigation light.

Regardless its tiny size, the first titanium FL33S is a true "muscle" flashlight. The v3.5 incorporates brand new lightweight titanium body with almost uncatchable PVDC coating with deep rainbow effect. New motion sensing UI makes operation easy and efficient.

Program now
User Guide What's new in v3.5
SERIAL NUMBER FL33S0005 (see details) LEDs: Triple CREE XP-L HI U6 5B4, Narrow Lens
Lum. flux: up to 2000lm (with IMR 18350)
Color Temperature: 4200K (Neutral)
4th LED: Bright deep red 640nm
Fully programmable with optical NXS R1
Motion Sensing UI
PVDC Titanium body with deep rainbow effect
Button: SiC Solid Ceramics
Battery Level and Voltage Indicator
IP68/IP69K up to 100 meters
Review
FL33 v3.5 Ti
PVDC

1. New high-efficient PWM-free switching regulator. There are at least four solid reasons why the switching driver makes its job a way better than any popular FET/H17F linear driver:

a) The switching regulation is almost lossless. It provides much longer runtime in all modes with any battery just because all battery power is directed to the LEDs, no FET resistance loss.

b) The switching regulation provides stable lumens and its output doesn't depend on the battery charge. As the battery voltage drops down, the regulator increases the amps to keep the wattage and thus the output stable.

c) The new FL33 uses a constant current regulation in all modes, with no PWM, in all range from 0.17lm to 3500lm. Flickerless and silent operation is not the only benefit of this technology. LED runs with much higher efficiency at low amps. The fewer amps are driven into LED, the higher its lumen per watt rating. The constant current fully takes advantage of this feature providing more runtime and increasing battery life.

d) The switching driver operates at a way wider voltage range. You can feed your flashlight with one or two ICR/IMR cells or with two CR123A primaries.

2. Two times more lumens with any battery. The new v3.0 draws up to 17 watt from one cell and up to 35 watt from two IMR cells. The peak output with 3up CREE XP-L is increased to 3500 lm (3.2 Amp per each LED).
3. Two moonlights. The 4th low-power color LED with its own lens is added for close range "moonlight" lighting. Three color options are available: yellow, deep red and red-orange. The red-orange is the brightest.
4. Wireless optical programming. You can fully customize your flashlight, enable advanced features, control the battery protection and stretching, select memory options and so on with any web enabled device, tablet or phone. You can even program it from your smart TV.
5. Enhanced safety. Reverse polarity protection, under-voltage and over-voltage checks, the battery amp limit (6A), programmable and adaptive temperature control, programmable output limits per each battery configuration, programmable Li-Ion battery protection with optional stretch, adjustable light bounce switch that protects your clothes from burns at close distance.
6. More functions. Instant access to any moonlight (white or red) or defense strobe. Voltage display shows the actual battery voltage, to access it press and hold the locked button. Use custom signal generator to program beacon or strobe or navigation light.

Regardless its tiny size, the first titanium FL33 is a true "muscle" flashlight. The v3.5 incorporates brand new lightweight titanium body with almost uncatchable PVDC coating with deep rainbow effect. New motion sensing UI makes operation easy and efficient.

Program now
User Guide What's new in v3.5
SERIAL NUMBER FL3300784 (see details) LEDs: Triple Nichia 219C HI CRI, Narrow Lens
Lum. flux: up to 2000lm (with IMR 18350)
Color Temperature: 4000K (Neutral)
4th LED: Amber 611nm
Fully programmable with optical NXS R1
Motion Sensing UI
PVDC Titanium body with deep rainbow effect
Button: SiC Solid Ceramics
Battery Level and Voltage Indicator
IP68/IP69K up to 100 meters
Review
FL33 v3.5 Ti
PVDC

1. New high-efficient PWM-free switching regulator. There are at least four solid reasons why the switching driver makes its job a way better than any popular FET/H17F linear driver:

a) The switching regulation is almost lossless. It provides much longer runtime in all modes with any battery just because all battery power is directed to the LEDs, no FET resistance loss.

b) The switching regulation provides stable lumens and its output doesn't depend on the battery charge. As the battery voltage drops down, the regulator increases the amps to keep the wattage and thus the output stable.

c) The new FL33 uses a constant current regulation in all modes, with no PWM, in all range from 0.17lm to 3500lm. Flickerless and silent operation is not the only benefit of this technology. LED runs with much higher efficiency at low amps. The fewer amps are driven into LED, the higher its lumen per watt rating. The constant current fully takes advantage of this feature providing more runtime and increasing battery life.

d) The switching driver operates at a way wider voltage range. You can feed your flashlight with one or two ICR/IMR cells or with two CR123A primaries.

2. Two times more lumens with any battery. The new v3.0 draws up to 17 watt from one cell and up to 35 watt from two IMR cells. The peak output with 3up CREE XP-L is increased to 3500 lm (3.2 Amp per each LED).
3. Two moonlights. The 4th low-power color LED with its own lens is added for close range "moonlight" lighting. Three color options are available: yellow, deep red and red-orange. The red-orange is the brightest.
4. Wireless optical programming. You can fully customize your flashlight, enable advanced features, control the battery protection and stretching, select memory options and so on with any web enabled device, tablet or phone. You can even program it from your smart TV.
5. Enhanced safety. Reverse polarity protection, under-voltage and over-voltage checks, the battery amp limit (6A), programmable and adaptive temperature control, programmable output limits per each battery configuration, programmable Li-Ion battery protection with optional stretch, adjustable light bounce switch that protects your clothes from burns at close distance.
6. More functions. Instant access to any moonlight (white or red) or defense strobe. Voltage display shows the actual battery voltage, to access it press and hold the locked button. Use custom signal generator to program beacon or strobe or navigation light.

A PVD ceramic coated flashlight in steel and aluminum housing that features wireless optical programming, electronic button user interface, a dual color output with high-power main neutral white channel and auxiliary low output amber for night vision. Its button is made from agate gem stone.

User Guide Beamshots What's new in v3
SERIAL NUMBER FL3300578 (see details) LEDs: 3UP CREE XP-L HI U6 5C
IP68/IP69K up to 100 meters
Lum. flux: 2000lm (18650) / 3500lm (2x18350)
4th LED (moonlight): Amber 611nm
Fully programmable with optical NXS R1
Color Temperature: 4200K (Neutral White)
Optics: T11 Custom TIR, 18° FWHM
Steel parts: bezel, tailcap, lanyard ring
Finish (all parts): TiCN PVD ceramic coating
Button: Black Agate , Battery Level Indicator
Watch Matt's review
v3.0
 
1. New high-efficient PWM-free switching regulator. There are at least four solid reasons why the switching driver makes its job a way better than any popular FET/H17F linear driver:

a) The switching regulation is almost lossless. It provides much longer runtime in all modes with any battery just because all battery power is directed to the LEDs, no FET resistance loss.

b) The switching regulation provides stable lumens and its output doesn't depend on the battery charge. As the battery voltage drops down, the regulator increases the amps to keep the wattage and thus the output stable.

c) The new FL33 uses a constant current regulation in all modes, with no PWM, in all range from 0.17lm to 3500lm. Flickerless and silent operation is not the only benefit of this technology. LED runs with much higher efficiency at low amps. The fewer amps are driven into LED, the higher its lumen per watt rating. The constant current fully takes advantage of this feature providing more runtime and increasing battery life.

d) The switching driver operates at a way wider voltage range. You can feed your flashlight with one or two ICR/IMR cells or with two CR123A primaries.

2. Two times more lumens with any battery. The new v3.0 draws up to 17 watt from one cell and up to 35 watt from two IMR cells. The peak output with 3up CREE XP-L is increased to 3500 lm (3.2 Amp per each LED).
3. Two moonlights. The 4th low-power color LED with its own lens is added for close range "moonlight" lighting. Three color options are available: yellow, deep red and red-orange. The red-orange is the brightest.
4. Wireless optical programming. You can fully customize your flashlight, enable advanced features, control the battery protection and stretching, select memory options and so on with any web enabled device, tablet or phone. You can even program it from your smart TV.
5. Enhanced safety. Reverse polarity protection, under-voltage and over-voltage checks, the battery amp limit (6A), programmable and adaptive temperature control, programmable output limits per each battery configuration, programmable Li-Ion battery protection with optional stretch, adjustable light bounce switch that protects your clothes from burns at close distance.
6. More functions. Instant access to any moonlight (white or red) or defense strobe. Voltage display shows the actual battery voltage, to access it press and hold the locked button. Use custom signal generator to program beacon or strobe or navigation light.

No doubt this is the best flashlight we ever made. It combines the cutting edge tech with ultimate performance, wireless optical programming and the unique carbonitride titanium coating featuring our brand new rainbow chameleon finish. Its button is handcrafted from black agate gem, it's believed can attract good fortune.

Program now
User Guide Beamshots What's new in v3
SERIAL NUMBER FL3300433 (see details) LEDs: Triple CREE XP-L HI U6 5B4
4th LED (moonlight): Deep red 640nm
Color Temperature: 4200K (Finest Neutral)
Peak lum. flux: 3500lm (with two IMR 18350)
IP68/IP69K up to 100 meters / 10 bar
Fully programmable with optical NXS R1
Optics: T11 Custom TIR, 18° FWHM
Steel parts: bezel, tailcap, lanyard ring
Finish: Chameleon TiCN PVD coating
Button: Black Agate , Battery Level Indicator
Matt's review
v3.0
 
1. New high-efficient PWM-free switching regulator. There are at least four solid reasons why the switching driver makes its job a way better than any popular FET/H17F linear driver:

a) The switching regulation is almost lossless. It provides much longer runtime in all modes with any battery just because all battery power is directed to the LEDs, no FET resistance loss.

b) The switching regulation provides stable lumens and its output doesn't depend on the battery charge. As the battery voltage drops down, the regulator increases the amps to keep the wattage and thus the output stable.

c) The new FL33 uses a constant current regulation in all modes, with no PWM, in all range from 0.17lm to 3500lm. Flickerless and silent operation is not the only benefit of this technology. LED runs with much higher efficiency at low amps. The fewer amps are driven into LED, the higher its lumen per watt rating. The constant current fully takes advantage of this feature providing more runtime and increasing battery life.

d) The switching driver operates at a way wider voltage range. You can feed your flashlight with one or two ICR/IMR cells or with two CR123A primaries.

2. Two times more lumens with any battery. The new v3.0 draws up to 17 watt from one cell and up to 35 watt from two IMR cells. The peak output with 3up CREE XP-L is increased to 3500 lm (3.2 Amp per each LED).
3. Two moonlights. The 4th low-power color LED with its own lens is added for close range "moonlight" lighting. Three color options are available: yellow, deep red and red-orange. The red-orange is the brightest.
4. Wireless optical programming. You can fully customize your flashlight, enable advanced features, control the battery protection and stretching, select memory options and so on with any web enabled device, tablet or phone. You can even program it from your smart TV.
5. Enhanced safety. Reverse polarity protection, under-voltage and over-voltage checks, the battery amp limit (6A), programmable and adaptive temperature control, programmable output limits per each battery configuration, programmable Li-Ion battery protection with optional stretch, adjustable light bounce switch that protects your clothes from burns at close distance.
6. More functions. Instant access to any moonlight (white or red) or defense strobe. Voltage display shows the actual battery voltage, to access it press and hold the locked button. Use custom signal generator to program beacon or strobe or navigation light.

Surprisingly, redomed Nichia 219B MDC with T11 lens overperformed CREE XP-L HI with standard narrow lens almost twice in candelas

Program now
User Guide Beamshots What's new in v3
SERIAL NUMBER FL33S0086 (see details) LEDs: Triple Nichia 219B MDC
4th LED (moonlight): Deep red 640nm
Color Temperature: 4200K (Finest Neutral)
Peak lum. flux: 1800lm (with IMR 18490)
IP68/IP69K up to 100 meters / 10 bar
Fully programmable with optical NXS R1
Optics: T11 Custom TIR, 18° FWHM
Steel parts: bezel, tailcap, lanyard ring
Finish: Chameleon TiCN PVD coating
Button: Cacholong Gem , Battery Indicator
Video Beamshot
v3.0
 
1. New high-efficient PWM-free switching regulator. There are at least four solid reasons why the switching driver makes its job a way better than any popular FET/H17F linear driver:

a) The switching regulation is almost lossless. It provides much longer runtime in all modes with any battery just because all battery power is directed to the LEDs, no FET resistance loss.

b) The switching regulation provides stable lumens and its output doesn't depend on the battery charge. As the battery voltage drops down, the regulator increases the amps to keep the wattage and thus the output stable.

c) The new FL33 uses a constant current regulation in all modes, with no PWM, in all range from 0.17lm to 3500lm. Flickerless and silent operation is not the only benefit of this technology. LED runs with much higher efficiency at low amps. The fewer amps are driven into LED, the higher its lumen per watt rating. The constant current fully takes advantage of this feature providing more runtime and increasing battery life.

d) The switching driver operates at a way wider voltage range. You can feed your flashlight with one or two ICR/IMR cells or with two CR123A primaries.

2. Two times more lumens with any battery. The new v3.0 draws up to 17 watt from one cell and up to 35 watt from two IMR cells. The peak output with 3up CREE XP-L is increased to 3500 lm (3.2 Amp per each LED).
3. Two moonlights. The 4th low-power color LED with its own lens is added for close range "moonlight" lighting. Three color options are available: yellow, deep red and red-orange. The red-orange is the brightest.
4. Wireless optical programming. You can fully customize your flashlight, enable advanced features, control the battery protection and stretching, select memory options and so on with any web enabled device, tablet or phone. You can even program it from your smart TV.
5. Enhanced safety. Reverse polarity protection, under-voltage and over-voltage checks, the battery amp limit (6A), programmable and adaptive temperature control, programmable output limits per each battery configuration, programmable Li-Ion battery protection with optional stretch, adjustable light bounce switch that protects your clothes from burns at close distance.
6. More functions. Instant access to any moonlight (white or red) or defense strobe. Voltage display shows the actual battery voltage, to access it press and hold the locked button. Use custom signal generator to program beacon or strobe or navigation light.

This is a very special flashlight, just one piece left. The last one with black color PVD ceramic coating. Its button looks like it's made of polished steel, but it is hematite. An awesome looking hard mineral that lasts much longer than raw metal and as mediums believe is used to stabilize and protect

User Guide Beamshots What's new in v3
SERIAL NUMBER FL3300279 (see details) LEDs: 3UP CREE XP-L HI U5 E3
IP68/IP69K up to 100 meters
Lum. flux: 2000lm (18650) / 3500lm (2x18350)
4th LED (moonlight): Amber 611nm
Fully programmable with optical NXS R1
Color Temperature: 5000K (Neutral White)
Optics: T11 Custom TIR, 18° FWHM
Steel parts: bezel, tailcap, lanyard ring
Finish (all parts): TiCN PVD ceramic coating
Button: Hematite , Battery Level Indicator
Watch Matt's review
v3.0
 
1. New high-efficient PWM-free switching regulator. There are at least four solid reasons why the switching driver makes its job a way better than any popular FET/H17F linear driver:

a) The switching regulation is almost lossless. It provides much longer runtime in all modes with any battery just because all battery power is directed to the LEDs, no FET resistance loss.

b) The switching regulation provides stable lumens and its output doesn't depend on the battery charge. As the battery voltage drops down, the regulator increases the amps to keep the wattage and thus the output stable.

c) The new FL33 uses a constant current regulation in all modes, with no PWM, in all range from 0.17lm to 3500lm. Flickerless and silent operation is not the only benefit of this technology. LED runs with much higher efficiency at low amps. The fewer amps are driven into LED, the higher its lumen per watt rating. The constant current fully takes advantage of this feature providing more runtime and increasing battery life.

d) The switching driver operates at a way wider voltage range. You can feed your flashlight with one or two ICR/IMR cells or with two CR123A primaries.

2. Two times more lumens with any battery. The new v3.0 draws up to 17 watt from one cell and up to 35 watt from two IMR cells. The peak output with 3up CREE XP-L is increased to 3500 lm (3.2 Amp per each LED).
3. Two moonlights. The 4th low-power color LED with its own lens is added for close range "moonlight" lighting. Three color options are available: yellow, deep red and red-orange. The red-orange is the brightest.
4. Wireless optical programming. You can fully customize your flashlight, enable advanced features, control the battery protection and stretching, select memory options and so on with any web enabled device, tablet or phone. You can even program it from your smart TV.
5. Enhanced safety. Reverse polarity protection, under-voltage and over-voltage checks, the battery amp limit (6A), programmable and adaptive temperature control, programmable output limits per each battery configuration, programmable Li-Ion battery protection with optional stretch, adjustable light bounce switch that protects your clothes from burns at close distance.
6. More functions. Instant access to any moonlight (white or red) or defense strobe. Voltage display shows the actual battery voltage, to access it press and hold the locked button. Use custom signal generator to program beacon or strobe or navigation light.

The tiniest FL33 fits any pocket and regardless its size it's still able to illuminate all around with a 2000 lumen wall of light. Its button is handcrafted from black agate gem.

Program now
User Guide What's new in v3
SERIAL NUMBER FL33S0105 (see details) LEDs: Triple CREE XP-L HI U6 5B4
4th LED (moonlight): Deep red 640nm
Color Temperature: 4200K (Neutral)
Lum. flux: up to 2000lm (with IMR 18350)
IP68/IP69K up to 100 meters
Fully programmable with optical NXS R1
Optics: T11 Custom TIR, 18° FWHM
Steel parts: bezel, tailcap, lanyard ring
Finish (all parts): TiCN PVD ceramic coating
Button: Black Agate , Battery Level Indicator
Watch Matt's review
v3.0
1. New high-efficient PWM-free switching regulator. There are at least four solid reasons why the switching driver makes its job a way better than any popular FET/H17F linear driver:

a) The switching regulation is almost lossless. It provides much longer runtime in all modes with any battery just because all battery power is directed to the LEDs, no FET resistance loss.

b) The switching regulation provides stable lumens and its output doesn't depend on the battery charge. As the battery voltage drops down, the regulator increases the amps to keep the wattage and thus the output stable.

c) The new FL33 uses a constant current regulation in all modes, with no PWM, in all range from 0.17lm to 3500lm. Flickerless and silent operation is not the only benefit of this technology. LED runs with much higher efficiency at low amps. The fewer amps are driven into LED, the higher its lumen per watt rating. The constant current fully takes advantage of this feature providing more runtime and increasing battery life.

d) The switching driver operates at a way wider voltage range. You can feed your flashlight with one or two ICR/IMR cells or with two CR123A primaries.

2. Two times more lumens with any battery. The new v3.0 draws up to 17 watt from one cell and up to 35 watt from two IMR cells. The peak output with 3up CREE XP-L is increased to 3500 lm (3.2 Amp per each LED).
3. Two moonlights. The 4th low-power color LED with its own lens is added for close range "moonlight" lighting. Three color options are available: yellow, deep red and red-orange. The red-orange is the brightest.
4. Wireless optical programming. You can fully customize your flashlight, enable advanced features, control the battery protection and stretching, select memory options and so on with any web enabled device, tablet or phone. You can even program it from your smart TV.
5. Enhanced safety. Reverse polarity protection, under-voltage and over-voltage checks, the battery amp limit (6A), programmable and adaptive temperature control, programmable output limits per each battery configuration, programmable Li-Ion battery protection with optional stretch, adjustable light bounce switch that protects your clothes from burns at close distance.
6. More functions. Instant access to any moonlight (white or red) or defense strobe. Voltage display shows the actual battery voltage, to access it press and hold the locked button. Use custom signal generator to program beacon or strobe or navigation light.
User Guide
Details
Program now!
SERIAL NUMBER FL3300444 (click to see details) LEDs: 3UP CREE XP-L HI U6 5B4
IP68/IP69K up to 100 meters
Lum. flux: 2000lm (ICR18650) / 3500lm (2x IMR18350)
4th LED (flood moonlight): Deep red 640nm
Fully programmable from web with optical NXS R1
Color Temperature (CCT): 4200K (Very Neutral White)
Optics: T11 Custom TIR, 18° FWHM
Steel parts: The bezel, the tailcap, the lanyard ring
Finish (all parts): TiCN PVD ceramic coating
Button: Cubic Zirconia Ceramic, Battery Level Indicator
v3.0
What's new in v3.0?
Extremely hard titanium carbonitride (TiCN) coating is disposed in a vacuum by a PVD process providing unique slick and durable black finish with a really nice grip.
BK7 mineral glass window. Multilayer 2-sided AR coating minimizes light loss.
Stainless steel 304 bezel. Mirror polished.
LED engine heat sink machined from a solid 6061 piece and then anodized to maximize thermal transfer.
Button made from a polished solid piece of ceramics. A multi-color battery level indicator is integrated into the button.
Just 4.5 inch (11.5cm) total length
6061 aluminum thick wall but lightweight battery tube maximizes thermal performance in high modes.
Hard and durable 304 stainless steel parts. Mirror polished.
1. New high-efficient PWM-free switching regulator. There are at least four solid reasons why the switching driver makes its job a way better than any popular FET/H17F linear driver:

a) The switching regulation is almost lossless. It provides much longer runtime in all modes with any battery just because all battery power is directed to the LEDs, no FET resistance loss.

b) The switching regulation provides stable lumens and its output doesn't depend on the battery charge. As the battery voltage drops down, the regulator increases the amps to keep the wattage and thus the output stable.

c) The new FL33 uses a constant current regulation in all modes, with no PWM, in all range from 0.17lm to 3500lm. Flickerless and silent operation is not the only benefit of this technology. LED runs with much higher efficiency at low amps. The fewer amps are driven into LED, the higher its lumen per watt rating. The constant current fully takes advantage of this feature providing more runtime and increasing battery life.

d) The switching driver operates at a way wider voltage range. You can feed your flashlight with one or two ICR/IMR cells or with two CR123A primaries.

2. Two times more lumens with any battery. The new v3.0 draws up to 17 watt from one cell and up to 35 watt from two IMR cells. The peak output with 3up CREE XP-L is increased to 3500 lm (3.2 Amp per each LED).
3. Two moonlights. The 4th low-power color LED with its own lens is added for close range "moonlight" lighting. Three color options are available: yellow, deep red and red-orange. The red-orange is the brightest.
4. Wireless optical programming. You can fully customize your flashlight, enable advanced features, control the battery protection and stretching, select memory options and so on with any web enabled device, tablet or phone. You can even program it from your smart TV.
5. Enhanced safety. Reverse polarity protection, under-voltage and over-voltage checks, the battery amp limit (6A), programmable and adaptive temperature control, programmable output limits per each battery configuration, programmable Li-Ion battery protection with optional stretch, adjustable light bounce switch that protects your clothes from burns at close distance.
6. More functions. Instant access to any moonlight (white or red) or defense strobe. Voltage display shows the actual battery voltage, to access it press and hold the locked button. Use custom signal generator to program beacon or strobe or navigation light.

The new highly integrated
electronics extends the limits
of a well-known custom
flashlight. Double lumens,
double runtime, nicely focused
T11 custom optics, deep
red "moonlight" mode
and optical wireless
programming - it's
all worth trying

User Guide Beamshot Program now!
SERIAL NUMBER FL3300414 (click to see details) LEDs: 3UP CREE XP-L HI U5 E3
IP68/IP69K up to 100 meters
Lum. flux: 2000lm (ICR18650) / 3500lm (2x IMR18350)
4th LED (flood moonlight): Deep red 640-650nm
Fully programmable from web with optical NXS R1
Color Temperature (CCT): 5000K (Neutral White)
Optics: T11 Custom TIR, 18° FWHM
Steel parts: The bezel, the tailcap, the lanyard ring
Finish (all parts): TiCN PVD ceramic coating
Button: Green-blue Chrysoprase, Battery Indicator
Watch Matt's quick review
v3.0
What's new in v3.0?
 
1. New high-efficient PWM-free switching regulator. There are at least four solid reasons why the switching driver makes its job a way better than any popular FET/H17F linear driver:

a) The switching regulation is almost lossless. It provides much longer runtime in all modes with any battery just because all battery power is directed to the LEDs, no FET resistance loss.

b) The switching regulation provides stable lumens and its output doesn't depend on the battery charge. As the battery voltage drops down, the regulator increases the amps to keep the wattage and thus the output stable.

c) The new FL33 uses a constant current regulation in all modes, with no PWM, in all range from 0.17lm to 3500lm. Flickerless and silent operation is not the only benefit of this technology. LED runs with much higher efficiency at low amps. The fewer amps are driven into LED, the higher its lumen per watt rating. The constant current fully takes advantage of this feature providing more runtime and increasing battery life.

d) The switching driver operates at a way wider voltage range. You can feed your flashlight with one or two ICR/IMR cells or with two CR123A primaries.

2. Two times more lumens with any battery. The new v3.0 draws up to 17 watt from one cell and up to 35 watt from two IMR cells. The peak output with 3up CREE XP-L is increased to 3500 lm (3.2 Amp per each LED).
3. Two moonlights. The 4th low-power color LED with its own lens is added for close range "moonlight" lighting. Three color options are available: yellow, deep red and red-orange. The red-orange is the brightest.
4. Wireless optical programming. You can fully customize your flashlight, enable advanced features, control the battery protection and stretching, select memory options and so on with any web enabled device, tablet or phone. You can even program it from your smart TV.
5. Enhanced safety. Reverse polarity protection, under-voltage and over-voltage checks, the battery amp limit (6A), programmable and adaptive temperature control, programmable output limits per each battery configuration, programmable Li-Ion battery protection with optional stretch, adjustable light bounce switch that protects your clothes from burns at close distance.
6. More functions. Instant access to any moonlight (white or red) or defense strobe. Voltage display shows the actual battery voltage, to access it press and hold the locked button. Use custom signal generator to program beacon or strobe or navigation light.

Meet absolutely new CREE XP-L HD triple in a minimalistic steel and aluminum body. When powered by two IMR cells this pocket beast produces up to 3500 lumens!

User Guide Design & Materials Beamshots Program it now!
v3.0
SERIAL NUMBER FL33S0127 (click to see details) Main LED: 3UP CREE XP-L V5 HD4 4200K
4th LED (moonlight): Deep red 640-650nm
Lum. flux: 2200lm (18650) / 3500lm (2x 18350)
Fully programmable from web with optical NXS R1
Optics: T11 Custom TIR, 18° FWHM
Steel parts: Bezel, Tailcap, Lanyard Ring
Finish (all parts): PVD ceramic coating,
TiCN (Titanium Carbonitride)
Button: Handcrafted Nephrite, Battery Gauge Indicator
What's new in v3.0?
BK7 mineral glass window. Multilayer 2-sided AR coating minimizes light loss.
Stainless steel 304 bezel. Mirror polished.
A handcrafted nephrite is used for the illuminated button. This green color translucent gem renders all colors of the battery indicator.
LED engine heat sink machined from a solid 6061 piece and then anodized to maximize thermal transfer.
6061 aluminum thick wall but lightweight battery tube maximizes thermal performance in high modes.
Hard and durable 304 stainless steel parts. Mirror polished.
Extremely hard titanium carbonitride (TiCN) coating is disposed in a vacuum by a PVD process providing unique slick and durable black finish with a really nice grip.
Just 4 inch (10cm) total length
 
1. New high-efficient PWM-free switching regulator. There are at least four solid reasons why the switching driver makes its job a way better than any popular FET/H17F linear driver:

a) The switching regulation is almost lossless. It provides much longer runtime in all modes with any battery just because all battery power is directed to the LEDs, no FET resistance loss.

b) The switching regulation provides stable lumens and its output doesn't depend on the battery charge. As the battery voltage drops down, the regulator increases the amps to keep the wattage and thus the output stable.

c) The new FL33 uses a constant current regulation in all modes, with no PWM, in all range from 0.17lm to 3500lm. Flickerless and silent operation is not the only benefit of this technology. LED runs with much higher efficiency at low amps. The fewer amps are driven into LED, the higher its lumen per watt rating. The constant current fully takes advantage of this feature providing more runtime and increasing battery life.

d) The switching driver operates at a way wider voltage range. You can feed your flashlight with one or two ICR/IMR cells or with two CR123A primaries.

2. Two times more lumens with any battery. The new v3.0 draws up to 17 watt from one cell and up to 35 watt from two IMR cells. The peak output with 3up CREE XP-L is increased to 3500 lm (3.2 Amp per each LED).
3. Two moonlights. The 4th low-power color LED with its own lens is added for close range "moonlight" lighting. Three color options are available: yellow, deep red and red-orange. The red-orange is the brightest.
4. Wireless optical programming. You can fully customize your flashlight, enable advanced features, control the battery protection and stretching, select memory options and so on with any web enabled device, tablet or phone. You can even program it from your smart TV.
5. Enhanced safety. Reverse polarity protection, under-voltage and over-voltage checks, the battery amp limit (6A), programmable and adaptive temperature control, programmable output limits per each battery configuration, programmable Li-Ion battery protection with optional stretch, adjustable light bounce switch that protects your clothes from burns at close distance.
6. More functions. Instant access to any moonlight (white or red) or defense strobe. Voltage display shows the actual battery voltage, to access it press and hold the locked button. Use custom signal generator to program beacon or strobe or navigation light.

Its button was created in outer space billions years ago. Touch to the eternity!
Talks

User Guide Beamshot Program it now!
v3.0
SERIAL NUMBER FL3300554 (click to see details) LEDs: 3UP CREE XP-L V5 HD4 (Redomed)
IP68/IP69K up to 100 meters
Lum. flux: 2000lm (ICR18650) / 3500lm (2x IMR18350)
4th LED (flood moonlight): Deep red 640-650nm
Fully programmable from web with optical NXS R1
Color Temperature (CCT): 4200K (Very Neutral White)
Optics: T11 Custom TIR, 18° FWHM
Steel parts: The bezel, the tailcap, the lanyard ring
Finish (all parts): PVD ceramic coating,
TiCN (Titanium Carbonitride)
Button: Stone Meteorite , RGB Battery Indicator
What's new in v3.0?
 
1. New high-efficient PWM-free switching regulator. There are at least four solid reasons why the switching driver makes its job a way better than any popular FET/H17F linear driver:

a) The switching regulation is almost lossless. It provides much longer runtime in all modes with any battery just because all battery power is directed to the LEDs, no FET resistance loss.

b) The switching regulation provides stable lumens and its output doesn't depend on the battery charge. As the battery voltage drops down, the regulator increases the amps to keep the wattage and thus the output stable.

c) The new FL33 uses a constant current regulation in all modes, with no PWM, in all range from 0.17lm to 3500lm. Flickerless and silent operation is not the only benefit of this technology. LED runs with much higher efficiency at low amps. The fewer amps are driven into LED, the higher its lumen per watt rating. The constant current fully takes advantage of this feature providing more runtime and increasing battery life.

d) The switching driver operates at a way wider voltage range. You can feed your flashlight with one or two ICR/IMR cells or with two CR123A primaries.

2. Two times more lumens with any battery. The new v3.0 draws up to 17 watt from one cell and up to 35 watt from two IMR cells. The peak output with 3up CREE XP-L is increased to 3500 lm (3.2 Amp per each LED).
3. Two moonlights. The 4th low-power color LED with its own lens is added for close range "moonlight" lighting. Three color options are available: yellow, deep red and red-orange. The red-orange is the brightest.
4. Wireless optical programming. You can fully customize your flashlight, enable advanced features, control the battery protection and stretching, select memory options and so on with any web enabled device, tablet or phone. You can even program it from your smart TV.
5. Enhanced safety. Reverse polarity protection, under-voltage and over-voltage checks, the battery amp limit (6A), programmable and adaptive temperature control, programmable output limits per each battery configuration, programmable Li-Ion battery protection with optional stretch, adjustable light bounce switch that protects your clothes from burns at close distance.
6. More functions. Instant access to any moonlight (white or red) or defense strobe. Voltage display shows the actual battery voltage, to access it press and hold the locked button. Use custom signal generator to program beacon or strobe or navigation light.

This dual-battery flashlight accepts single ICR 18650 or two IMR 18350s for ultimate performance. The button of this flashlight looks like it's made from steel but it's a natural gemstone called hematite, the mineral form of iron oxide. The spectral signature of hematite was seen on the planet Mars by the infrared spectrometer on the NASA Mars Global Surveyor.

User Guide Forum Beamshots Try it
SERIAL NUMBER FL3300572 (click to see details) LEDs: 3UP Nichia NVSW219BT (D280 L2)
Peak performance: 1000lm (one cell), 1400lm (two cells)
Color Temperature (CCT): 5000K (Neutral White)
Optics: TIR Narrow Clear, 24° FWHM
Steel parts: The bezel, the tailcap, the lanyard ring
Finish (all parts): PVD ceramic coating,
TiCN (Titanium Carbonitride)
Button: Hematite gem (steel color)
RGB Battery Indicator

A pocket-sized flood torch makes a great job as a home backup light in case of blackout. The widest lens softly and evenly fills all around with probably the most comfort warm light.

User Guide Forum Try it
SERIAL NUMBER FL3300547 (click to see details) LEDs: CREE XP-G2 Triple (R3 ra80 min)
Peak performance: 1300lm (two cells)
Color Temperature (CCT): 3000K (Warm White)
Optics: TIR Wide Frosted, 60° FWHM
Steel parts: The bezel, the tailcap, the lanyard ring
Finish (all parts): PVD ceramic coating,
TiCN (Titanium Carbonitride)
Button: Cubic Zirconia Ceramic, RGB Battery Indicator
Rechargeable supply: ICR 18650 or 2x IMR 18350

The most compact version of FL33 performs like crazy. Three CREE XP-G2 5000K (3C) are driven by one ampere each producing about 1000 lumens of neutral white light. Battery is NOT included.

User Guide Forum Try it
SERIAL NUMBER FL33S0116 (click to see details) LEDs: CREE XP-G2 Triple
Peak performance: 1000lm
Throw range (FL-1): 130 meters
Color Temperature (CCT): 5000K (Neutral White)
Optics: TIR Narrow Clear, 26° FWHM
Steel parts/PVD: The bezel, the tailcap, the lanyard ring
Button: Full Ceramic, RGB Battery Indicator
Supply: 1x AW IMR 18350 700mAh Rechargeable

This compact version
of FL33 is able to do
a real magic of turning
night into day thanks
to soft and even flood
illumination generated by a
frosted TIR optics. Three
CREE XP-G2 5000K (3C) are
driven by one ampere each
producing about 1000 lumens of
neutral white light. Battery is NOT included.

User Guide Forum Try it
SERIAL NUMBER FL33S0114 (click to see details) LEDs: CREE XP-G2 Triple
Peak performance: 1000lm
Throw range (FL-1): 80 meters
Color Temperature (CCT): 5000K (Neutral White)
Optics: TIR Narrow Frosted, 30° FWHM
Steel parts: The bezel, the tailcap, the lanyard ring
Finish (all parts): PVD ceramic coating,
TiCN (Titanium Carbonitride)
Button: Full Ceramic, RGB Battery Indicator
Supply: 1x AW IMR 18350 700mAh Rechargeable

CREE XP-E2 LEDs
provide much longer
throw due to smaller die
size. This astonishingly compact flashlight throws as far as over 180 meters according to FL-1 standard! Battery is NOT included.

User Guide Forum Try it
SERIAL NUMBER FL33S0092 (click to see details) LEDs: CREE XP-E2 Triple (Ext. Throw)
Peak performance: 800lm
Throw range (FL-1): 180 meters
Color Temperature (CCT): 6000K (Cool White)
Optics: TIR Narrow Clear, 16° FWHM
Steel parts: The bezel, the tailcap, the lanyard ring
Finish (all parts): PVD ceramic coating,
TiCN (Titanium Carbonitride)
Button: Full Ceramic, RGB Battery Indicator
Supply: 1x AW IMR 18350 700mAh Rechargeable

CREE XP-E2 LEDs provide much longer throw due to smaller die size. This astonishingly compact flashlight throws as far as over 180 meters according to FL-1 standard! One AW IMR 18350 rechargeable cell is included so you will get a ready-to-go flashlight right out of the box.

User Guide Forum Try it
SERIAL NUMBER FL33S0085 (click to see details) LEDs: CREE XP-E2 Triple (Ext. Throw)
Peak performance: 800lm
Throw range (FL-1): 180 meters
Color Temperature (CCT): 6000K (Cool White)
Optics: TIR Narrow Clear, 16° FWHM
Steel parts/PVD: The bezel, the tailcap, the lanyard ring
Button: Full Ceramic, RGB Battery Indicator
Supply: 1x AW IMR 18350 700mAh Rechargeable

CREE XP-E2 LEDs
use tiny chips, that's
why this flashlight features
a way extended range and
throws a way more narrow
beam when compared with more
common CREE XP-G2 triples.
The candela ratings: 7350cd (single
18650) or 9800cd (two 18350). When
powered by two 18350 IMR cells this
flood light reaches 200 meters range
according to ANSI FL-1 standard.

User Guide Forum Try it
SERIAL NUMBER FL330318 (click to see details) LEDs: CREE XP-E2 Triple
Lum. flux: 750lm (18650) / 1000lm (2x 18350)
1x 18650 (8W): 7350cd (170 ANSI meters)
2x 18350 IMR (15W): 9800cd (200 ANSI meters)
Color Temperature (CCT): 6000K (Cool White)
Optics: TIR Narrow Clear, 16° FWHM
Steel parts: The bezel, the tailcap, the lanyard ring
Finish (all parts): PVD ceramic coating,
TiCN (Titanium Carbonitride)
Button: Full Ceramic, RGB Battery Indicator

Welcome the first compact triple-LED flashlight that exceeds 200 meters range. The heart of it runs on three lemon-kind Samsung 3535's that were chemically pre-processed to completely dissolve the primary silicone lens (dedomed). When powered by two 18350 IMR cells this pocket beast generates a 10500cd 16 degrees yellow beam which is great to navigate through dense mist.

User Guide Forum Try it
SERIAL NUMBER FL330302 (click to see details) LEDs: Samsung 3535 Dedomed Triple
1x 18650 (8W): 6300cd (158 meters)
2x 18350 IMR (15W): 10500cd (204 meters)
Color Temperature (CCT): 5000K (Neutral White)
Optics: TIR Narrow Clear, 16° FWHM
Steel parts: The bezel, the tailcap, the lanyard ring
Finish (all parts): PVD ceramic coating,
TiCN (Titanium Carbonitride)
Button: Full Ceramic, RGB Battery Indicator

This torch comes with two rechargeable AW IMR 18350 cells providing about 1500 lumens of almost real sunlight running on full. The LEDs for this flashlight are produced by Nichia. If you had no experience with this brand before, you will be amazed by its light quality and tint. The white button is made from gemstone called cacholong also known as Kalmuck Agate.

User Guide Forum Beamshots Try it
SERIAL NUMBER FL330120 (click to see details) LEDs: 3UP Nichia NVSW219BT (D260 L1)
Peak performance: 900lm (one cell), 1400lm (two cells)
Color Temperature (CCT): 5000K (Neutral White)
Optics: TIR Narrow Clear, 24° FWHM
Steel parts: The bezel, the tailcap, the lanyard ring
Finish (all parts): PVD ceramic coating,
TiCN (Titanium Carbonitride)
Button: Cacholong gem (white color), RGB Battery Indicator

We present a close range EDC power light with finest color rendering provided by Japanese second generation Nichia 219 LEDs and frosted TIR optics. You can feed it with one of your 18650s for runtime or with a couple of IMR 18350s to maximize performance. The button is made of translucent nephrite. It's a natural hand-made gem which renders all colors of the indicator.

User Guide Forum Beamshots Try it
SERIAL NUMBER FL330063 (click to see details) LEDs: 3UP Nichia NVSW219BT (D260 L1)
Peak performance: 900lm (one cell), 1400lm (two cells)
Color Temperature (CCT): 5000K (Neutral White)
Optics: TIR Narrow Clear, 30° FWHM
Steel parts: The bezel, the tailcap, the lanyard ring
Finish (all parts): PVD ceramic coating,
TiCN (Titanium Carbonitride)
Button: Nephrite gem (translucent green), RGB Battery Indicator

A well known and reputable
CREE XP-G2 triple, neutral
white color temperature,
a narrow clear optics
and the most popular
single ICR 18650
battery size - this
is probably
the best EDC

flashlight
configuration
providing at least
1000 lumens for
more than one hour
and running 50 hours
in minimal mode.

User Guide Forum Try it
SERIAL NUMBER FL3300487 (click to see details) LEDs: CREE XP-G2 Triple
Lum. flux: 1000lm (18650) / 1400lm (2x 18350)
1x 18650 (8W): 4900cd (140 ANSI meters)
2x 18350 IMR (15W): 6860cd (167 ANSI meters)
Color Temperature (CCT): 5000K (Neutral White)
Optics: TIR Narrow Clear, 24° FWHM
Steel parts: The bezel, the tailcap, the lanyard ring
Finish (all parts): PVD ceramic coating,
TiCN (Titanium Carbonitride)
Button: Full Ceramic, RGB Battery Indicator

A well-balanced EDC beast with finest color rendering provided by Japanese second generation Nichia 219 LEDs. You can feed it with one of your 18650s for runtime or with a couple of IMR 18350s to maximize performance. The button is made of translucent nephrite. It's a natural hand-made gem which renders all colors of the indicator.

User Guide Forum Beamshots Try it
SERIAL NUMBER FL3300286 (click to see details) LEDs: 3UP Nichia NVSW219BT (D260 L1)
Peak performance: 900lm (one cell), 1400lm (two cells)
Color Temperature (CCT): 5000K (Neutral White)
Optics: TIR Narrow Clear, 24° FWHM
Steel parts: The bezel, the tailcap, the lanyard ring
Finish (all parts): PVD ceramic coating,
TiCN (Titanium Carbonitride)
Button: Nephrite gem (translucent green)
RGB Battery Indicator
The MINION became a result of extreme miniaturization of powerful and bright 2500 lumen triple flashlight...