Instagram View on Instagram
RegisterForgot your password?Log in with Facebook
+79261200006
Configure Your FX30 Smart Light Fixture

A fully protected configuration for outdoor applications

IP68 IP69K10BAR / 100M Water Resistant

$165.00

All versions feature high efficient constant current power conversion with no PWM in all modes. It guarantees absolutely flickerless silent operation and greatly extends the lifespan

This system automatically seamlessly regulates the output to prevent overheating and maximize the amount of light produced. The peak is 40 Watts / 4000 LM is provided with CREE XP-L triple and adequate cooling

This version is equipped with BK7 AR coated glass lens, waterproof heat resistant gland and best in class heavy duty KRILUM 3-way cable (50cm)

A high efficiency protected indoor fixture spotlight

IP54Protection from dust
and splashing water

$125.00

All versions feature high efficient constant current power conversion with no PWM in all modes. It guarantees absolutely flickerless silent operation and greatly extends the lifespan

This system automatically seamlessly regulates the output to prevent overheating and maximize the amount of light produced. The peak is 40 Watts / 4000 LM is provided with CREE XP-L triple and adequate cooling

Option 1Select the enclosure configuration of your FX30 light

40W light engine optimized for luminous flux that you connect to a standard 12V lead

3B35Synchronous BuckCREE XP-L HI 4200K

Do not exceed 20V upper voltage limit! This unit will not operate under 9V, consider 371D light engine for a low voltage project

A fully regulated 40W / 4000LM output from any DC power line from 9 to 18 volts

Smooth seamless constant current output adjustment based on temperature feedback prevents overheating in any operation environment

Built-in protection functions: reverse polarity, overheating, regulator overloading (amps limit)

An integrated 400W surge supperssor prevents damage to driver and control circuitry from high voltage transients which may happen in a vehicle electrical system

Two mode operation: full output and fast "police" strobe which is activated by connecting the control line to the ground lead. User interface enhancements are welcomed.

20W light engine optimized
for throw that you connect to a standard 12V lead

3B35Synchronous BuckNichia 219B MDC

Do not exceed 20V upper voltage limit! This unit will not operate under 9V, consider 371D light engine for a low voltage project

A fully regulated 20W / 2000LM output from any DC power line from 9 to 18 volts

Smooth seamless constant current output adjustment based on temperature feedback prevents overheating in any operation environment

Built-in protection functions: reverse polarity, overheating, regulator overloading (amps limit)

An integrated 400W surge supperssor prevents damage to driver and control circuitry from high voltage transients which may happen in a vehicle electrical system

Two mode operation: full output and fast "police" strobe which is activated by connecting the control line to the ground lead. User interface enhancements are welcomed.

35W light engine optimized
for luminous flux for a battery powered project

371D1S / 2S BoostCREE XP-L HI 4200K

$+50.00
Do not use it with a 12V supply, consider 3B35 light engine in place

A fully regulated 35W / 3500LM output from two lithium ICR batteries

Auxiliary deep red color LED for beacon and close range illumination

Fully programmable with wireless optical NXS R1 application, learn it here

Enhanced customizable user interface with momentary (electronic) button control and stand-by mode

Built-in protection functions: reverse polarity, programmable temperature limit, regulator overloading (amps limit), programmable battery protection and stretch, light bounce sensor

20W light engine optimized
for throw for a battery powered project

371D1S / 2S BoostNichia 219B MDC

$+50.00
Do not use it with a 12V supply, consider 3B35 light engine in place

A fully regulated 20W / 2000LM output from two lithium ICR batteries

Auxiliary deep red color LED for beacon and close range illumination

Fully programmable with wireless optical NXS R1 application, learn it here

Enhanced customizable user interface with momentary (electronic) button control and stand-by mode

Built-in protection functions: reverse polarity, programmable temperature limit, regulator overloading (amps limit), programmable battery protection and stretch, light bounce sensor

Option 2Select the light engine which we install into this unit

This lens produces a narrow spot with sharp edges

10507Narrow Clear Lens

The beam angle and spot sizes are provided for standard CREE XP-L configuration. Nichia 219 MDC LEDs feature about 50% narrower beam and almost a double throw
Outdoor beamshot

T11Custom Narrow Lens

$+25.00

Features a more compact hot spot than any CARCLO triple

Adds a soft spill for more informative close range lighting

Try it with Nichia 219 MDC for a 50% narrower beam!

This lens produces a narrow spot with soft edges

10511Narrow Frosted Lens

The beam angle and spot sizes are provided for standard CREE XP-L configuration. Nichia 219 MDC LEDs feature about 50% narrower beam and almost a double throw

This lens produces a medium spot with soft edges

10508Medium Frosted Lens

The beam angle and spot sizes are provided for standard CREE XP-L configuration. Nichia 219 MDC LEDs feature about 50% narrower beam and almost a double throw

This lens produces a wide spot with soft edges

10509Wide Frosted Lens

The beam angle and spot sizes are provided for standard CREE XP-L configuration. Nichia 219 MDC LEDs feature about 50% narrower beam and almost a double throw

This lens produces a stripe shaped spot

10510Elliptical Lens

The beam angle and spot sizes are provided for standard CREE XP-L configuration. Nichia 219 MDC LEDs feature about 50% narrower beam and almost a double throw
Option 3Select the beam pattern
Datasheet
The newly reserved and paid units are normally shipped in 5-7 working days. The exact shipping date may depend on the configuration and possible delay when we need to restock missing parts. Orders are handled in first come first served order. We require a 100% cash deposit to accept your order. We issue a full refund upon a customer's claim in case if no delivery is made within three months. We DO NOT issue any refunds until the deadline is met. By clicking "Add to My Order" you agree to the above terms.
The FL33 is a premium flashlight in each every respect...